Verex MONITOR AFx Guide de l'utilisateur télécharger pdf (Page 210)

204

MONITOR AFx™ Director V4.1 User's Guide

500-9041 v4.1



Standard



- Module:

The number (from the MODULE

screen) for the elevator controller module

associated with the elevator cab.

-Port Number:

Whether this is the 1

or 2

elevator on the selected elevator-controller

module;

- Token Format:

The card/token format

associated with this elevator (lift) cab. Up to

two card/token formats are supported for each

panel, as defined through the System Access

screen.

"Wiegand" pertains to cards/tokens for readers with

Wiegand data-format (Wiegand, Proximity, etc.).

Similarly, "Magstripe" pertains to cards for readers

with magnetic-stripe output (magstripe, bar-code,

etc.).

For details on setting up the card/token format, refer to

"System Card-Access Settings".

- LCD Name:

A shorter version of the name to be

displayed at LCD keypads. This is assigned

automatically, and can also be changed if

desired (max. 12 chars., plain text).



Extended



- Bi-Colour LED Mode:

Select this if the reader

at this door has a single bi-colour LED (instead

of the two separate LEDs).

Note:

Arming-stations are not supported in elevator

cabs.

- Insertion Type Reader:

Ensures the access

card is not read more than once when

inserted and removed.

- Floor Button Monitor:

Whether or not other

call buttons are to be disabled when a floor is

selected

(requires call-button-reporting wiring

between the elevator unit and our floor relay board)

- Floor Button Enabled Time:

This is the

duration that the allowed floor call-buttons will

be available after a valid card is presented at the

reader in the elevator (lift) cab.

- Tamper Circuit:

The type of circuit/wiring

associated with the reader tamper

input/sensor. ("Not Required" means this

connection is not being used/monitored.)



Reader



(Elevator (Lift) Reader Settings)

- In Area:

This is the area associated with this

elevator cab.

Time and attendance reporting requires that all

readers used to exit from the "required attendance

zone" be set as "Outside".

This will typically pertain to the interior readers on the

perimeter of the facility, and may also include

additional readers (such as that allow entry to a

cafeteria or fitness room).

Elevator Area: It is best to set up unique area(s) for

use with elevators and the associated access

hallways. This allows the authority to control elevators

and floors to be separated from other features, and

also helps to identify activity/alarm messages

pertaining to elevator readers. (The authority to

control elevators and floors pertains to the "Door

Control" authority selection for the specific area.)

To create a new area, and set up its operating

characteristics, refer to "Areas and Related Settings".

For details on user authorities, refer to "Authorities for

Users/Entrants".

Card Mode

- Schedule

, and

In / Out of schedule:

These

settings specify the basic method required to

satisfy the elevator reader—i.e., present

access token and/or enter a PIN at the

keypad. If scheduled, different access

requirements can be selected for when the

schedule is active versus outside of the

chosen schedule.

UID vs. Card Number: The system can be set to

require a full card number instead of the user-ID

number. (Wherever you see "UID", a card number

would have to be entered instead.)

Related Topic: Account-Wide Panel Settings (look for

Setup

", and then "

User Logon Mode

").

Card/PIN: "Card or PIN" means "Card-Only, or User-

ID+PIN". With "Card+PIN", the card must be

presented (does not allow UID+PIN).

Manual Disarming: For an armed area that is NOT set

to 'Auto Disarm on Valid Token', the user will also

have to access the alarm system and disarm the area.

For details on the "Auto-Disarm" feature, refer to

"Areas and Related Settings".

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 323 324

Commentaires sur ces manuels

Pas de commentaire

Verex MONITOR AFx Guide de l'utilisateur Page 210

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Verex MONITOR AFx