Verex MONITOR AFx Guide de l'utilisateur télécharger pdf (Page 261)

500-9041 v4.1

Welcome Report Control Admin Sys Config

Tech-Ref

255

Identifying the Server to a PC Running

only the Communications Software

Open the Windows task-bar (move your

mouse to the bottom-right of the screen), right-

click the LCD/Telephone symbol, and select

Change Server

If this symbol is not present: Start up the

communications software as described previously /

above.

If the right-click menu does not appear: This may mean

that the Director-server PC or software is not running,

or the activation key is not installed on the server (or

only) PC.

Then, refer to the "Change Server" description

(to follow) while selecting or entering the

server name or 'IP' address. (Click

when finished.)

If an error message appears, refer to the notes under

"Start Up the Communications Software on each

Applicable PC", previous / above.

On a typical MONITOR AFx Director workstation, the

server is identified during login.

Add Modems and Serial Cables to be

Used for Panel Communications

Open the Windows task-bar (move your

mouse to the bottom-right of the screen), right-

click the LCD/Telephone symbol, and select

Port Configuration

If this symbol is not present: Start up the

communications software as described previously /

above.

If the right-click menu does not appear: This may mean

that the Director-server PC or software is not running,

or the activation key is not installed on the server (or

only) PC.

When the 'Device Configuration' screen

appears, right-click the screen and select

Add

Then, refer to the details for the "Port / Device

Configuration Screen" while making your

selections. When finished, click

Save

Why Can't I Change Items after Saving? You cannot

edit saved settings for a comms device. If settings

need to be changed, you must delete the specific

modem or cable-connection, and then re-add it with the

new settings. (See "If you Need to Delete..." to follow.)

After adding the desired modems and cable-

connections here, they must be included in a

"Communication Pool".

Exception:

With a brand-new installation, the first

'Communications Pool' is set up for you.

To set up a communications pool, refer to

"Communication Pools for System Panels".

If the database is ever

transferred

to another PC:

You must ensure that either:

•

Any previously referenced modems and/or "Direct

Cable Connections" have been set up on the new

PC,

;

•

The equivalent on the new PC have been installed,

added through this (comms) software, and included

in any applicable "Communications Pools".

For details, refer to "New Installation? Try the Wizard!",

or "Panel Connection Overview".

If you Wish to Remove an Item (modem

or cable-connection) from the List

Before deleting a modem or cable-connection,

check to ensure it is

not

presently being used

by an active communications session.

For details, refer to "Panel Communications and

Updates", and "Communication Pools for System

Panels".

Removing an item through the port/device configuration

screen does not delete it from the PC. Rather, it

removes references in the software for the specific

item.

Note:

In a client-server environment, communications

sessions can be initiated from

any

MONITOR AFx

Director workstation.

-------------------------

Now, open the Windows task-bar (move your

mouse to the bottom-right of the screen), right-

click the LCD/Telephone symbol, and select

Port Configuration

When the 'Device Configuration' screen

appears, right-click the desired cable-

connection or modem, and select

Delete

Final Steps:

•

Add any cable or modem connection(s) if

required to replace the deleted one.

For details, refer to:

•

"PC-to-Panel—Direct Connection",

;

•

"PC and Panels—Modem Connections"

•

Check the 'communication pools' to ensure

they have the desired connections assigned.

For details, refer to "Communication Pools for

System Panels".

Sample screens and selection-descriptions

appear on the following pages.

1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 323 324

Verex MONITOR AFx Guide de l'utilisateur Page 261

Commentaires sur ces manuels

Verex MONITOR AFx Guide de l'utilisateur Page 261

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Verex MONITOR AFx