Verex MONITOR AFx Guide de l'utilisateur télécharger pdf (Page 251)

500-9041 v4.1

Welcome Report Control Admin Sys Config

Tech-Ref

245

Beginning with V4.0 MONITOR AFx Director, you can

use the

Communications Wizard

to set up and initiate

communications with a panel. For more information,

refer to "New Installation? Try the Wizard!"

1) Install/Setup Modems and/or Direct-

Cable Connections

Ensure the windows "Direct Cable Con-

nections" and/or modems have been set up on

each applicable PC.

For a panel that connects directly (through a cable),

refer to "PC-to-Panel—Direct Connection". For a dial-

up modem connection, refer to "PC and Panels—

Modem Connections".

Note:

Modems require

additional set-up as described in the indicated section.

2) Make Your Software Aware of Modems

and Direct-Cable-Connections

Start the communications software, and add

the modems and "Direct-Cable-Connections"

to be used for panel communications. This

software module is called

MONITOR AFx

Director-Communications.exe

. This program

can be accessed through

Programs

(from the

Start

menu),

in the

…\MONITOR AFx

Director V4

folder.

For details, refer to "Serial

Port

/ Modem Setup (Communications Software)".

Windows 2000 / NT: This step requires

administrator

authority under Windows 2000 / NT.

3) Set Up a "Communications Pool"

Set up a "Communications Pool" for your

panel, and assign the connection that was

selected in the preceding step. This screen is

accessed through the

Communications

section in the 'tree' window.

Tip:

The very first communications pool for a brand

new system is set up automatically. When adding

panels, the communications pools must be set up

manually. For details, refer to "Communication Pools

for System Panels".

4) Enter Your "Connection Config-

uration" Settings

(Panel Group screen)

Enter the "Connection Configuration" settings

for your panel (including selecting the

'Communications Pool' that was set up in the

previous step. These settings can be found at

the bottom of the form after selecting your

Panel Group

" in the tree. (Logical Tree View

must not be in effect.)

Tip:

For a brand new system, these values are set up

automatically. (Exception: The phone number for a

dial-up connection must be entered manually). When

adding panels, these items must be set manually.

For details, refer to "Panels, Panel Groups, and Related

Settings".

5) Enter Your "Host Connection"

Settings

(System Configuration screen)

Set up your "Host Connection" settings (at the

bottom of the '

System Communication

screen). This will include the panel serial

number, a non-zero "Panel Code", and other

desired settings.

For details, refer to "Monitoring, Paging, & Remote Mgt.

Settings".

Panel Connection Overview

Welcome

The following is a quick outline of the steps needed

to set up a panel connection. For details on each

step, refer to the indicated section, and look for

headings that apply to your present task, and type of

connection.

Browsing for Topics: You can also browse forward

through the remaining topics, and follow the sections

that pertain to your present task and type of

connection.

IP Network Connections (

≥

v3.3)

IP connections are documented separately. For

details, refer to the installation guide provided with

the IP interface (may also be in PDF format on your

Director CD).

Panel & Software Revisions:

Beginning with

V3.20

, the Monitor AFx Director

software can connect with panels

V2.0

and higher.

Note: Associated panels must be the same rev.

level, and the Director software must typically be

upgraded to the same level or higher. Exception:

V3.3 panels OK with V3.20 software (if IP-related

features are not needed).

1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 323 324

Commentaires sur ces manuels

Pas de commentaire

Verex MONITOR AFx Guide de l'utilisateur Page 251

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Verex MONITOR AFx